Revo RETRT2812-1 - Manual (Page 12)

USER’S MANUAL
Backlight Setting
●
Unlike conventional cameras, W-V chip camera is designed to deliver a distinctive subject
and background at the same time, even when the subject is backlight, by using the features
of the proprietary W-V DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates 'BACKLIGHT'.
MA N SETUP
1 LENS DC
2 EXPOSURE
3 WH TE BAL
ATW
4 SSDR OFF
5 BACKL GHT OFF
6 DNR3 ON
7 DAY/N GHT AUTO
8 SPEC AL
.
9 EX T SAVE
2. Select a desired mode using the Function Setup switch.
•
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
•
HLC (High Light Compensation) : If the scene contains extremely bright light areas
such as; from car headlights, the light can mask out much of the on-screen detail
- LEVEL : Adjust level of the HLC function.
- LIMIT: Enable to change the operating condition.
- MASK COLOR/TONE: Change the color / transparency of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT: Adjust the area to be enhanced
•
OFF: Not being used
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
•
Select 'BLC' to adjust the area to be ■ Select 'HLC' to adjust the area to be
enhanced then adjust the level. enhanced then adjust the level.