Revo RETRT2812-1 - Manual (Page 13)

USER’S MANUAL USER’S MANUAL
HLC SETUP
BLC SETUP
LEVEL LOW
T
38
BOTTOM 109
LEFT
54
R GHT 121
Press Set to Return
172
Press Set to Return
M DDLE
N GHT ONLY
BLACK LEVEL
L M TS
MASK COLOR
MASK TONE
TOP
BOTTOM
LEFT
R GHT
1
5
5
120
■ Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
■ When dark, the HLC is only activated when a bright light exceeding a specific size in
NIGHT ONLY mode.
☞
NOTE
■ The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
■ BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
DNR3 Setting
●
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'DNR3' by using the Function
Setup switch so that the arrow indicates 'DNR3'.
MA N SETUP
1 LENS
2 EXPOSURE
3 WH TE BAL
4.SSDR
5 BACKL GHT
6 DNR3
7 DAY/N GHT
8 SPEC AL
9 EX T
DC
ATW
OFF
OFF
ON
AUTO
SAVE
2. Select a desired mode using the Function Setup switch.
•
OFF: Deactivates DNR3. Noise is not reduced.
•
ON: Activates DNR3 so that noise is reduced.