Revo RETRT2812-1 - Manual (Page 20)

USER’S MANUAL
Trouble Shooting
POSSIBLE CAUSE
☞ Check the power cable, power supply output and video
connection between the camera and monitor.
☞ Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
☞ Adjust the monitor controls, as required.
☞ If the camera is facing a very strong light, change
the camera position.
☞ Adjust the lens focus
☞ Adjust the contrast control of the monitor.
☞ If there is an intermediate device, correctly set the 75Ω/Hi-z.
The camera is not ☞ Check the camera is correctly connected to an appropriate
regulated power source.
☞ Has MOTION DET been set to ON in the menu?
☞ Has MD AREA been properly defined?
☞ Check the settings in WHITE BALANCE menu.
☞ Make sure that the camera isn’t facing direct sunlight or
Fluorescent lighting. If necessary, change the camera position.
●
working properly
the camera is hot.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen flickers.
The SENS-UP does
not work.
20
PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
and the surface of
☞ Check that the AGC setting in the EXPOSURE menu isn't set to OFF.
☞ Check the EXPOSURE menu and make sure SHUTTER is set to------.