ZyXEL Communications IES-5005 - Manual (Page 17)

IES-5000/5005/6000 Support Notes
16
c. Set ACL-rules to pick out PPPoE traffic and replace its VID / Priority.
(1) Create ACL profiles
// ‘pppoe1’ & ‘pppoe2’ are the Profile names, and ‘34915’ is the decimal value for
hexadecimal value 0x8863, and ‘34916’ is for 0x8864.//
(2) Apply the ACL profile to the VDSL port 3-1
// “3-1” represents the slot 3 and port 1, which is exactly the VDSL port we are using.//
Based on the above settings, all the PPPoE traffics including the Ethernet Type: 0x8863 and
0x8864, upcoming from VDSL port 3-1 will be picked out by ACL rules ‘pppoe1’ and ‘pppoe2’,
and then replaced with new VLAN ID/Priority ‘100/0’.
All contents copyright (c) 2008 ZyXEL Communications Corporation.