ZyXEL Communications IES-5005 User Manual
Page 60
Advertising
IES-5000/5005/6000 Support Notes
59
4. Loopback
Diagnosis
MD:
Select an MD name.
MA:
Select an MA name under the selected MD.
MEPID:
Select an MEP ID to specify which MEP port on the device initiates the test.
Target:
Specify the destination of the link you are checking. You can select MEPID and enter a
remote MEP’s ID or select MAC and enter a remote MEP port’s MAC address.
Test:
Click this to start the loopback connectivity test.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
Advertising