ZyXEL Communications IES-5005 - Manual (Page 31)

IES-5000/5005/6000 Support Notes
30
In this network application, we will use an IES-5000, a ZyXEL ES-2024
VLAN-aware switch and Prestige 660R-61 CPE (you may also use P791 if you have
the SLC-1248G line card installed on the IES).
1. IES-5000 Settings
1.1 VLAN setup
Follow the procedure as described in the VLAN Application section to configure the
VLAN settings on the IES-5000.
Create a VLAN with a VID of 10 and set Port 1 and ENET 1 to be members of this
VLAN. Also enable egress tagging on ENET 1.
TGE1> vlan name 10 VLAN10
TGE1> vlan set 10 up1 fix tag
TGE1> port pvc vlan 7-1-0/33 10 join untag
Create a VLAN with a VID of 20 and set Port 1 and ENET 1 to be members of this
VLAN. Also enable egress tagging on ENET 1.
TGE1> vlan name 20 VLAN20
TGE1> vlan set 20 up1 fix tag
TGE1> port pvc vlan 7-1-0/33 20 join untag
1.2 VC profile setup
For profile setup, create a Defval_CBR VC profile with the Encap, Class, PCR and
CDVT settings as shown. Make sure the profile has the same LLC-based
encapsulation setting as the IES-500 and the CBR class is set with a higher ATM QoS
priority .
CI command
TGE1> profile atm set Def_CBR cbr 300000
1.3 Multiple PVCs setup
All contents copyright (c) 2008 ZyXEL Communications Corporation.