ZyXEL Communications IES-5005 - Manual (Page 61)

IES-5000/5005/6000 Support Notes
60
CLI Command Introduction
• Enable CFM
MSC1000G> switch cfm enable
• Disable CFM
MSC1000G>swtichcfm disable
• Create a MD
MSC1000G> switch cfmmd set <md-name><level>
• Delete a MD
MSC1000G> switch cfmmd delete <md-name>
• Create a MA
MSC1000G> switch cfm ma set <md-name><ma-name><primary-vlan> [<cci-interval>]
• Delete a MA
MSC1000G> switch cfm ma delete <md-name><ma-name>
• Create a MEP
MSC1000G> switch cfmmep set
<md-name><ma-name><mep-id><giga-port>|<slot-port><direction><priority>
[cci<cci-enabled>] [alm<alarm-time>] [rst<reset-time>] [mac<mac-address>]
• Delete a MEP
MSC1000G> switch cfmmep delete <md-name><ma-name><mep-id>
• Create a MIP
MSC1000G> switch cfmmip set <md-name><ma-name><giga-port>|<slot-port>
• Delete a MIP
MSC1000G> switch cfmmip delete <md-name><ma-name><giga-port>|<slot-port>
• Execute Loopback
MSC1000G> diagnostic cfm loopback <md-name><ma-name><ep-id><remote-ep-id>|<mac>
• Execute Linktrace
All contents copyright (c) 2008 ZyXEL Communications Corporation.