Factory preset recall options & expander modules, Troubleshooting – Yamaha CLP-555 User Manual

Page 36

Advertising
background image

34

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Factory Preset Recall

Options & Expander Modules

Options

HPE-160 Stereo Headphones

High-performance lightweight dynamic head-

phones with extra-soft ear pads.

All dual mode, split mode, reverb, effect, touch sensitivity, tuning

settings, and the settings affected by the Backup Functions can be
restored to their original factory preset values by holding the C7 key
while turning the [POWER] switch ON. This also erases all recorder
data, and sets all Backup on/off settings (F9) to “OFF”.

POWER

Troubleshooting

If you encounter what appears to be a malfunction, please check the following points before assuming

that your Clavinova is faulty.

1. No Sound When the Power is Turned ON

Is the AC plug properly connected to the Clavinova

and an AC wall outlet? Check the AC connection

carefully. Is the MASTER VOLUME control turned

up to a reasonable listening level?

Also make sure that a pair of headphones is not

plugged into the PHONES jack, and that the Local

Control (page 29) is ON.

2. The Damper Pedal Doesn’t Work

If the damper pedal doesn’t work, or notes are

sustained even when the pedal is not pressed, make

sure that the pedal cord is properly plugged into the

main unit (page 46).

3. The Clavinova Reproduces Radio or TV Sound

This can occur if there is a high-power transmitter

in your vicinity. Contact your Yamaha dealer.

4. Intermittent Static Noise

This is usually due to turning ON or OFF a house-

hold appliance or other electronic equipment which is

fed by the same AC mains line as your Clavinova.

5. Interference Appears On Radio or TV Sets

Located Near the Clavinova

The Clavinova contains digital circuitry which can

generate radio-frequency noise. The solution is to

move the Clavinova further away from the affected

equipment, or vice versa.

6. Distorted Sound When the Clavinova is Con-

nected to An External Amplifier/Speaker

System

If the Clavinova is connected to a stereo system or

instrument amplifier and the sound is distorted, reduce

the setting of the Clavinova volume control to a level

at which the distortion ceases.

If “

Scn

” appears on the display an internal malfunction has occurred. In this case, contact your Yamaha

dealer.

Expander Modules

DOU-10 Disk Orchestra Unit

A range of MIDI recording and playback

functions, plus Yamaha Disk Orchestra Collection,

Disklavier PianoSoft™, General MIDI, and

Standard MIDI File disk playback capability.

Advertising