Zoom Gateway/Router Zoom V3 - Manual (Page 21)

Chapter 1: Installation Instructions 21
• From time to time, Zoom may release improved firmware.
This is available at www.zoom.com , along with upgrade
instructions. We recommend that you check this site
periodically for updates.
1.7 Changing the V3’s Password
& Resetting the Unit to Its
Default Settings
To change the V3’s Password, click the Advanced Setup icon at
the top of the Zoom Configuration Manager. Under the
Administration heading, click Admin Password.
• Type the new password, then retype it for verification
purposes.
• Click Save Changes, Write Settings to Flash and Reboot,
and Confirm.
Note:
The password must be at least 8 characters. If you change your
password and then forget it, your only recourse is to reset it to the
default by performing a hardware system reset (see below).