Zoom Gateway/Router Zoom V3 - Manual (Page 45)

Chapter 3: Playing Online Games 45
1111
Choose an IP address.
Double-click the Zoom V3 icon on your desktop (or type 10.2.2.2
in your Web browser just the way you would normally type a web
address) to get to the V3’s Zoom Configuration Manager. Click
the Advanced Setup icon, then click LAN Settings. There you
will see the starting and ending range of the V3’s dynamic (DHCP)
LAN IP addresses. You need to choose an IP Address that is
outside this range. Normally you should pick the next higher
number. For example, if the range shown is 10.2.2.4 to 10.2.2.15,
your Host IP Address should be the next IP address after
10.2.2.15, which would be 10.2.2.16. Unless you have changed the
V3’s IP address settings, which is very unlikely, just use that
number. Write down the number you choose for reference. The
rest of the instructions will assume that you are using 10.2.2.16.
DMZ IP Address: _______________________________
Windows users continue below.
Mac users jump to Step 4 (page 47).
Linux users jump to Step 5 (page 48).
2222
Windows Users Only: Open the TCP/IP Properties
dialog box.
For Windows XP: From the desktop click the Start button, point
to Control Panel and then Network Connections. Then right-
click (NOT left-click) Local Area Connection, select Properties,
highlight your NIC card’s TCP/IP entry (it should start with
TCP/IP and have the characters 10/100, NIC, or Ether in it –
and not have the words AOL, Dial-up, or Adapter). Click
Properties to display the Windows TCP/IP Properties dialog
box.