Declaration of conformity, Appendix e: regulatory information 81 – Zoom Gateway/Router Zoom V3 User Manual
Page 81
Appendix E: Regulatory Information
81
Declaration of Conformity
We, the undersigned,
Company
Zoom Technologies, Inc.
Address, City
207 South Street, Boston, Massachusetts 02111
Country
USA
Phone number
617 423 1072
Fax number
617 542 8276
certify and declare under our sole responsibility that the following equipment:
Product description / Intended
use
EU / EFTA member states
intended for use
EU: Austria, Belgium, Denmark, Finland, France, Germany
Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal,
Spain, Sweden, United Kingdom
EFTA: Switzerland, Iceland, Liechtenstein, Norway
Member states with restrictive
use
None
Manufacturer
Zoom Technologies, Inc.
Brand
Zoom V3 VoIP Gateway/Router
Type
Series 0225; Models 5567, 5570, 5577, 5580, 1612, 1615, 1622,
1625, 9222, 9225, 9232, 9235
is tested to and conforms with the essential requirements for protection of health and the safety of the user
and any other person and Electromagnetic Compatibility, as included in following standards:
Standard
Issue Date
EN60950-1
IEC60950-1
EN55022
EN55024
2001
2001
1998/A1:2000/A2:2003
1998/A1:2001/A2:2003
and therefore complies with the essential requirements and provisions of the Directive 1999/5/EC of the
European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications
Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex II
(Conformity Assessment procedure referred to in article 10(3)).
The following Notified Body has been consulted in the Conformity Assessment procedure:
Notified body number
Name and address
N/A
The technical documentation as required by the Conformity Assessment procedure is kept at the following
address:
Company
Zoom Technologies, Inc.
Address, City
207 South Street, Boston, Massachusetts 02111
Country
USA
Phone number
617 423 1072
Fax number
617 542 8276
TCF/TF reference nr.
0225-/TF
Drawn up in
Boston, MA USA
Date
December 19, 2005
Name and position
Andy Pollock, Hardware
Engineering Manager