Zoom Gateway/Router Zoom V3 - Manual (Page 30)

30 Zoom V3 User’s Guide
Activating Call Management
Features
Note:
Call forwarding works only for calls that arrive over VoIP. The V3
cannot forward calls from the PSTN. However, if you have VoIP
to PSTN service, you can forward VoIP calls from the V3 to the
PSTN.
The command sequence to control call management is simple. We
have included a sample table below. On your telephone keypad,
enter
# <Forward code> <Forward Number> #
The V3 will attempt to place a call to the Forward Number.
If someone answers within 15 seconds, the forwarding feature will
become active. If not, you need to re-enter the command:
# <Forward code> <Forward Number> #
Then the forwarding feature you have selected will become active.
You will hear a stutter dial tone while call forwarding is active.