Zoom Gateway/Router Zoom V3 - Manual (Page 72)

72 Zoom V3 User’s Guide
If you have a WAN IP address, skip to page 72.
If you don’t have a WAN IP address and you are using a
Cable Modem or a DSL PPPoA or 1483 Modem, your
next step should be to do a Release/Renew operation.
1111
Go to the V3’s Advanced Setup page and click WAN
DHCP Status.
2222
Select Release and click Save Changes.
3333
Select Renew and click Save Changes.
4444
Go to your Web browser (i.e., Internet Explorer or
Netscape Navigator) and try to connect to a familiar Web
address. If you are unsuccessful, check to see if you have a
WAN IP address (see page 71). If you do not, you should
contact Zoom Technical Support.
If you have a WAN IP address, but can’t connect to the
Internet, make sure that:
Your Ethernet or USB cable connections are okay.
Check that the appropriate V3 front panel light is lit (LAN 1,
2, 3, or 4 or USB). This will confirm that the connection is
good.
Your WAN connection is okay.
Check that the V3 front panel LINK light is lit. This will
confirm that the connection to your cable or DSL modem is
good.
Your computer’s TCP/IP properties are correct.
Macintosh users: TCP/IP instructions are on page 68.
Linux users: TCP/IP instructions are on page 69.
Windows users: