Singing with vocal harmony, Setting the vocal harmony chorus depth, Setting the vocal harmony balance – Yamaha CVP-109 EN User Manual
Page 178
178
CVP-109/107/105/700
■
Setting the Vocal Harmony Chorus Depth
..............................
CHORUS
• Range: 0 (no effect) — 127 (max.)
• Basic setting: 0
When the Vocal Harmony function is on, the Clavinova applies a cho-
rus effect — selected by the
CHORUS TYPE setting in the CHORUS
display (page 52) — to the lead and harmony vocals. You can change the
amount of chorus that is applied to the vocal parts using the
CHORUS
function in page 1 of the VOCAL HARMONY display.
To set the depth of the chorus effect, select the
CHORUS function,
then use the data dial or the [–] and [+] keys to change the value.
➔
The
CHORUS
value changes.
You can also advance the value by holding down the
CHORUS but-
ton. To reset the value to its basic setting of
0, simultaneously press the
[–] and [+] buttons.
■
Setting the Vocal Harmony Balance
..............................................
BALANCE
• Range: 0 — 127
• Basic setting: Depends on vocal har-
mony type.
You can set the balance between the lead and harmony vocal parts
using the
BALANCE function on page 1 of the VOCAL HARMONY
display. Raising this value increases the volume of the vocal harmony
and decreases that of the lead vocal. If it is set to the maximum value of
127, you will hear only the vocal harmony from the Clavinova’s speak-
ers; if it is set to
0, only the lead vocal will be heard.
Select the
BALANCE function, then use the data dial or the [–] and
[+] keys to change the value.
➔
The
BALANCE
value changes.
You can also advance the value by holding down the
CHORUS but-
ton. To reset the value to its basic setting, simultaneously press the [–]
and [+] buttons.
Because the basic setting of the
BALANCE function depends on the
currently selected vocal harmony type, the value of this function may
change automatically when you change the
HARMONY TYPE setting
(page 177).
176
When Vocal Harmony Is Off…
Chorus is also applied to the microphone
signal when the Vocal Harmony function
is turned off.
The [CHORUS] button setting does not
affect the chorus effect that is applied to
vocals. To turn this chorus off, set the
chorus depth to 0.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Singing with Vocal Harmony
(CVP-109/107/700)