Yamaha CVP-109 EN - Manual (Page 34)

34
CVP-109/107/105/700
■ Editing the Voice
...............................................................................................
Select the desired voice for editing, then set each parameter.
The ORGAN FLUTES display has two pages: [FOOTAGE] and [AT-
TACK]. Press the rightmost LCD button to change between the displays.
Press the
PRESET button in each display to instantly return to the pre-
edited voice.
● Making settings in the ORGAN FLUTES [FOOTAGE] dis-
play
Footage volume settings
Select the footage “bar” to be adjusted by using the
CURSOR but-
tons, then set the volume by using the data dial or [–] and [+] buttons.
Setting the speed of the rotary speaker effect
Press the middle LCD button to change between
FAST and SLOW.
To call up the [ATTACK] display, either
press ATTACK or press the CURSOR
>
button when the cursor is at “1.”
• The FAST/SLOW function is only
displayed when an effect (page 54) is
being applied to the keyboard part
playing the Organ Flutes voice.
• If an effect type other than rotary
speaker is applied to a part playing the
Organ Flutes voice, the FAST/SLOW
function switches the effect variation
on or off (see page 56) instead of
adjusting the speaker modulation
speed.
● Voice Type and Volume Image (About Organ Footages)
The standard pitch is 8 feet. A setting of 4 feet is one octave higher
than 8 feet, 2 feet is two octaves higher, and 1 foot is three octaves
higher; 16 feet is one octave lower.
16-foot
16
,
5+1/3-foot
5 + 1 / 3
,
4-foot
4
,
2-2/3-foot
2+ 2 / 3
,
2-foot
2
,
1+1/3-foot
1+ 1 / 3
,
1-foot
1
,
4-foot
4
,
2+2/3-foot
2+ 2 / 3
,
2-foot
2
,
8-foot
8
,
Continuous tones Decay tones
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Selecting Voices
32