ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 161)

ES-4024A User’s Guide
160 Chapter 25 RIP
Figure 92 RIP
The following table describes the labels in this screen.
Table 57 RIP
LABEL DESCRIPTION
Active Select this check box to enable RIP on the switch.
Index This field displays the index number of the entry.
Network This field displays the IP domain configured on the switch.
Refer to the section on IP Setup for more information on configuring IP domains.
Direction Select the RIP direction from the drop-down list box. Choices are Outgoing, Incoming,
Both and None.
Version Select the RIP version from the drop-down list box. Choices are RIP-1, RIP-2B and RIP-
2M.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring the fields again.