ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 216)

ES-4024A User’s Guide
Chapter 37 Introducing the Commands 215
interface port-channel <port-
list>
Enables a port or a list of ports
for configuration. See Section
37.9.4 on page 223 for more
details.
route-domain <ip-
address>/<mask-bits>
Enables a routing domain for
configuration. See Section
37.9.5 on page 225 for more
details.
ip default-gateway <ip> Sets the default gateway’s IP
address for the out-of-band
management port.
name-server <ip> Sets the IP address of a domain
name server.
route <ip> <mask>
<next-hop-ip>
Creates a static route.
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
lacp Enables Link Aggregation
Control Protocol (LACP).
system-priority <1-65535> Sets the priority of an active port
using LACP.
logins username <name>
password <pwd>
Configures up to four read-only
login accounts to log into the
web configurator.
logout Exits from the CLI.
mac-aging-time <10-3000> Sets learned MAC aging time.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC
address forwarding rule.
inactive Disables a static MAC address
forwarding rule.
marking-rule classifier
<classifier-name>
dscp <0-63>
Enables DSCP marking rule for
the specified classifier.
inactive Disables DSCP marking rule for
the specified classifier.
mirror classifier
<classifier-name>
Enables port mirroring on a
traffic flow.
inactive Disables port mirroring on a
traffic flow.
mirror-port Enables port mirroring.
<port-num> Enables port mirroring on a
specified port.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION