ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 211)

ES-4024A User’s Guide
210 Chapter 37 Introducing the Commands
no logging Disables syslog logging.
ping <IP|host-name> Sends Ping request to an Ethernet
device.
reload Restarts the system.
show
bandwidth-control Displays bandwidth control settings.
broadcast-storm-
control
Displays broadcast storm control settings.
classifier Displays all classifier related information.
[name] Displays the specified classifier related
information.
cluster Displays cluster management status.
candidates Displays cluster candidate information.
member Displays the MAC address of the cluster
member(s).
member mac <mac-
addr>
Displays the status of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
dhcp relay Displays DHCP relay settings.
server Displays DHCP server settings.
server <vlan-id> Displays DHCP server settings in a
specified VLAN.
diffserv Displays general DiffServ settings.
filter Displays filter settings.
garp Displays GARP information.
hardware-monitor <C|F> Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
interface <port-
number>
Displays current interface status.
interfaces config
<port-list>
Displays current interface configuration.
egress Displays outgoing port information.
broadcast-
storm-control
Displays broadcast storm control settings.
port-access-
authentication
Displays port authentication settings.
port-security Displays port MAC address learning
settings.
spanning-tree Displays STP settings on the port.
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION