ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 219)

ES-4024A User’s Guide
218 Chapter 37 Introducing the Commands
snmp-server trap-destination
<ip>
Disables sending of SNMP
traps to a station.
spanning-tree Disables STP.
timesync Disables timeserver settings.
trunk <T1|T2|T3|T4|T5> Disables the specified trunk
group.
lacp Disables LACP in the trunk
groups.
vlan <vlan-id> Deletes the static VLAN entry.
vlan1q gvrp Disables GVRP on the switch.
port-isolation Disables port isolation.
password <password> Change the password for
Enable mode.
port-access-
authenticator
Enables 802.1x authentication
on the switch.
queue level <0-7> priority
<0-3>
Sets the priority level-to-
physical queue mapping.
radius-server host <ip> [acct-port
<socket-number>]
[key <key-string>]
Sets the IP address of the
external RADIUS server, UDP
port and shared key.
remote-
management
<index> Enables a remote management
setting.
start-addr <ip>
end-addr <ip>
service
<telnet|ftp|http|
icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
router dvmrp Enables and enters the DVMRP
configuration mode.
exit Leaves the DVMRP
configuration mode.
threshold <ttl-
value>
Sets the DVMRP threshold
value.
igmp Enables and enters the IGMP
configuration mode.
exit Leaves the IGMP configuration
mode.
ospf <router-id> Enables and enters the OSPF
configuration mode.
area <area-id> Enables and sets the area ID.
area <area-id>
authentication
Enables simple authentication
for the area.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION