Yamaha DGC1B - Manual (Page 31)

19
English Chapter 6: Basic Playback
Standard Audio CDs
Standard CDs contain two audio channels (R and
L). Both are output via the built-in speakers as a
CD stereo system would.
Note: You can also connect an external CD changer
to the AUDIO/ANALOG MIDI IN connector
on the control unit (rear panel) and play back
multiple audio CDs on the Disklavier.
Specifying a Disk
When you want to play back songs, you need to
first specify which disk you want to play back, as
the Disklavier has a total of 17 disks (1 floppy
disk and 16 Memory Disks).
Press the [SELECT] buttons and
specify a disk for playback.
Each press of the [SELECT] button toggles
the floppy disk, CD, and Memory Disks (0
to 9 and A to F) in the DRIVE indicator.
Note: When you insert a floppy disk or CD
into their respective drives, the letters
“Fd” and “Cd” automatically appear on
the left side of the display.
Note: “Fd” and “Cd” appear only when a
floppy disk or CD is inserted in their
respective drives.
For floppy disks, the title of the disk
scrolls across the display, then the number
and title of the first song appear.
Pressing [STOP] will stop the disk title
scrolling and display the number and title
of the first song.
For CDs, the following displays appear.
For Memory Disks, the disk number or
letter also flashes in the bottom row of the
display.
Note: “x” indicates Memory Disks that are
unformatted or contain no songs.
Note: The disk drive may occasionally
produce a sound when the disk begins
to spin. This is the normal sound of the
disk drive starting to read or write to
the disk; it does not indicate that there
is anything wrong with the disk or disk
drive.
Flashes
SELECT
➔
➔