Yamaha DGC1B - Manual (Page 65)

53
English Chapter 13: Using the PianoSmar
t Featur
e
The “Registering” display does not appear
during the second and subsequent
playbacks of a song that is being played
repeatedly.
Note: If the initial playback is stopped at any
time or if pause or fast forward is
initiated, the song information will not
be stored.
This measurement is repeated during the
next playback.
The PLAY/PAUSE indicator lights, and
sync playback of the CD and MIDI songs
starts. The Disklavier plays the piano parts,
actually moving the keys up and down. The
CD sound is heard through the speakers.
The time display starts counting up and the
velocity meters show the velocity of the
piano part notes currently being played, as
shown.
Temporarily
Suspending Playback
1
Press [PLAY/PAUSE].
Playback stops and the PLAY/PAUSE
indicator flashes.
2
Press [PLAY/PAUSE] again to
continue playback.
2
Specify a FD (Smart PianoSoft).
The following display appears.
PLAY/PAUSE
PLAY/PAUSE
This means “PianoSmart”.
“SPS Type Disk” appears as the disk title
display when a Smart PianoSoft disk
purchased on the market has been inserted.
Note: 1. The following display appears if a
different CD has been inserted in
the CD drive when Smart PianoSoft
was selected. The song name
display will be restored after a few
moments. (The song name display
is restored in a few seconds.)
2. When the floppy disk which has
been recognized is Smart PianoSoft,
the selected drive will not change to
the CD drive even when a CD is
inserted.
3
Press [PLAY/PAUSE].
The PLAY/PAUSE indicator lights.
The following display appears (during
automatic measurement).
The synchronization may shift during the
first playback of each song, but normal
operation will be restored starting with the
second and subsequent times.
If operation fails to return to normal,
proceed with the adjustments in the
manual mode which is described later.