Adjusting the volume, Decreases the volume, and [+] increases the volume – Yamaha DGC1B User Manual

Page 36

Advertising
background image

24

Adjusting the Volume

You can adjust volume with the Control Unit or
with the remote control as described below. Since
all piano songs are recorded at the maximum
volume level of 0, volume can be decreased down
to –10, the softest volume at which the piano can
play.

For Ensemble songs, the volume of the piano and
internal XG tone generator are adjusted
simultaneously, so it is a good idea to first balance
the volume of the piano and XG tone generator.

☛ See “Balancing the Ensemble Volume (TG Master

Balance)” on page 25.

For songs on PianoSoft.PlusAudio, you should
first balance the volume of the MIDI piano and
Audio parts.

☛ See “Balancing the CD Volume (CD Master

Balance)” on page 26.

The LED volume level indicators show volume
levels in the manner shown below. For example,
when two consecutive indicators are lit, the
volume level is between these two levels.

Note: Make sure the VOLUME knob on the

Amplifier is set to an appropriately audible

level. If the volume knob on the Amplifier is

turned fully counterclockwise, no sound may

be produced even when you adjust the volume

on the Control Unit.

Once you set the volume of the Amplifier, you

do not need to adjust it frequently.

The volume level setting is saved when another
song is selected, another disk inserted or selected,
or when the Disklavier is turned off.

Note: This setting does not affect manual playing.

Note: When the volume is set to -10, there may be a

slight delay in sound production following key

strokes, and the Disklavier may skip some

notes. Furthermore, at this volume setting,

touch strength does not affect note dynamics.

a

On the Control Unit, press the
Selector until the VOLUME
indicator lights. Then press [–/NO]
to decrease or [+/YES] to increase
the volume.

b

On the remote control, use the
[VOLUME] buttons to adjust the
volume.

[–] decreases the volume, and [+] increases
the volume.

BALANCE

TRANSPOSE

TEMPO

VOLUME

–/NO

+/YES

Remote Control

VOLUME

+

LED

0

Volume

0

-1

-2

-3

-4

-5

LED

Volume

-6

-7

-8

-9

-10

-10 -8 -6

-2

-4

0

-10 -8 -6

-2

-4

Advertising