Yamaha DGC1B - Manual (Page 9)

i
English
Important
Read the following before operating the Disklavier.
Warnings
• Do not locate the Disklavier in a place subject
to excessive heat, low temperatures, or direct
sunlight. This could be a fire hazard and may
damage the finish and internal parts.
• Excessive humidity or dust can lead to fire or
electric shock.
• Connect the plug on the Disklavier power
cable to a compatible AC outlet. Failure to do
so will present a fire and electric shock hazard.
If the power cable plug is not compatible with
your AC outlet, consult your dealer.
• Do not plug several devices into the same AC
outlet. This can overload the AC outlet, and
lead to fire and electric shock hazard. It may
also affect the performance of some devices.
• Do not place heavy objects on the power cable.
A damaged power cable is a potential fire and
electric shock hazard. If the power cable runs
under a carpet, make sure heavy objects,
including the Disklavier, are not placed on top
of the cable.
• If the power cable is damaged (i.e. cut or a
bare wire is exposed), ask your dealer for a
replacement. Using the Disklavier in this
condition is a fire and shock hazard.
• When disconnecting the power cable from an
AC outlet, always pull from the plug. Never
pull the cable. Damaging the cable in this way
is a potential fire and electric shock hazard.
• The cover of the unit should be removed only
by qualified service technicians.
• Do not place liquid containers such as vases,
potted plants, glasses, cosmetic bottles,
medicines, etc., on top of the Disklavier.
• Do not try to modify the Disklavier, as this
could lead to fire or electric shock hazard.
• When moving the Disklavier to another
location, turn off the power, remove the power
plug from the AC outlet, and remove all cables
connected to external devices.
Cautions
• Turn off all audio devices when connecting to
the Disklavier. Refer to the user’s guide for
each device. Use the correct cables and
connect as specified.
• Set the volume level on all the devices to
minimum before applying power.
• Do not play the Disklavier at a high volume
for extended periods; you may damage your
hearing. This is especially important when
using headphones. If you think your hearing
ability is impaired, consult your doctor.
• If the Disklavier is worked extremely hard —
that is, prolonged playback of very “busy”
songs — the Disklavier’s thermal relay may
trip. The thermal relay will automatically reset
when the Disklavier has cooled down.
• If you notice any abnormality — such as
smoke, odor, or noise — turn off the
Disklavier immediately, and remove the power
plug from the AC outlet. Consult your dealer
for repair.
• If a foreign object or water gets inside the
Disklavier turn it off immediately, and remove
the power plug from the AC outlet. Consult
your dealer.
• If you plan not to use the Disklavier for a long
period of time (such as when you are on
vacation), disconnect the electrical mains.
• Always remove the power plug from the AC
outlet before cleaning the Disklavier. Leaving
the power plug connected presents a risk of
electric shock.
• Do not use benzene, thinner, cleaning
detergent, or a chemical cloth to clean the
Disklavier.
• Do not place metal objects with rubber feet on
top of the Disklavier. The color and finish of
the Disklavier can be damaged.
• Do not place heavy objects on the Disklavier.
Doing so can damage the Disklavier.