Yamaha DGC1B - Manual (Page 39)

27
English Chapter 6: Basic Playback
5
Press the Selector until the
VOLUME indicator lights.
Changing the Tempo
You can speed up or slow down the playback
tempo. Slowing down the playback tempo can be
useful when practicing a difficult piano part.
These tempo settings remain in effect until
recording is started, the disk is ejected, or the
Disklavier is turned off.
Note: You cannot change the playback tempo of
songs on CDs.
☛ Tempo changes to songs that you have recorded
yourself can be made permanent. See “Changing
the Default Song Tempo” on page 26 in the
Advanced Operation Manual.
To change the tempo, use one of the following
options:
a
On the Control Unit, press the
Selector until the TEMPO indicator
lights. Then, press [+/YES] to
increase or [–/NO] to decrease the
tempo.
Playback tempo can be adjusted from –50%
to +20% in 1% increments.
b
On the remote control, use the
[TEMPO] buttons to adjust the
tempo.
[–] decreases the tempo, and [+] increases
the tempo. [0] resets the tempo to 00%.
Once the tempo has been changed, the new
tempo value is shown continuously on the
display.
Flashes
BALANCE
TRANSPOSE
TEMPO
VOLUME
–/NO +/YES
Remote Control
TEMPO
+ 0 –
BALANCE
TRANSPOSE
TEMPO
VOLUME