ZyXEL Communications 650 Series User Manual
Page 259
Prestige 650 Series User’s Guide
Maintenance
21-13
Figure 21-9 Firmware Upgrade
The following table describes the labels in this screen.
Table 21-8 Firmware Upgrade
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
Reset
Click this button to clear all user-entered configuration information and return the Prestige to
its factory defaults. Refer to the Resetting the Prestige section.
This button is not available on all models.
Do not turn off the Prestige while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the Prestige
again.
The Prestige automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.