ZyXEL Communications 650 Series - Manual (Page 263)

Prestige 650 Series User’s Guide
Maintenance 21-17
If you uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default Prestige IP address (192.168.1.1). See the appendix for details on
how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Back to return to the main
Configuration screen.
Figure 21-16 Configuration Upload Error
21.7.3 Back to Factory Defaults
Clicking the Reset button in this section clears all user-entered configuration information and returns the
Prestige to its factory defaults as shown on the screen.
This will erase all configurations that you have applied.
Click Configuration and then Default to display the screen shown next.
Figure 21-17 Back to Factory Default