ZyXEL Communications 650 Series - Manual (Page 380)

Prestige 650 Series User’s Guide
35-6 System Information and Diagnosis
After the Prestige finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
Figure 35-7 Sample Error and Information Messages
35.4.2 Syslog and Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System Maintenance — UNIX
Syslog, as shown next.
Figure 35-8 Menu 24.3.2 System Maintenance : Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter Log= No
PPP Log= No
Firewall Log= No
VPN Log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle
1 Sat Jan 01 00:00:02 2000 PP09 -WARN SNMP TRAP 3: link up
2 Sat Jan 01 00:00:02 2000 PP0f -WARN Last errorlog repeat 1 Times
3 Sat Jan 01 00:00:02 2000 PP0f INFO LAN promiscuous mode <0>
4 Sat Jan 01 00:00:02 2000 PP0f INFO LAN promiscuous mode <1>
5 Sat Jan 01 00:00:02 2000 PP00 INFO Starting Connectivity Monitor
6 Sat Jan 01 00:00:02 2000 PP1a INFO adjtime task pause 1 day
7 Sat Jan 01 00:00:02 2000 PP1b INFO monitoring WAN connectivity
8 Sat Jan 01 00:00:02 2000 PP1b INFO conn-mon change
9 Sat Jan 01 00:00:22 2000 PP0a WARN MPOA Link Down
10 Sat Jan 01 00:03:41 2000 PP13 INFO SMT Password pass
Clear Error Log (y/n):