Xantrex Technology Inverter Communications Adapter - Manual (Page 29)

2
Configuration
Chapter 2, “Configuration” describes how to install the
ICAP software provided with the ICA and how to set up
a modem (if used).
The following topics are covered in this chapter.
For this topic... See...
“Installing the ICA Software: ICAP” page 14
“To install the software with Autorun enabled
on your CDROM drive:” page 14
“To start the program from the CD if Autorun
is disabled on your computer:” page 19
“To start the program from a command
prompt:” page 20
“Setting Up a Modem Connection” page 21