Xantrex Technology Inverter Communications Adapter - Manual (Page 43)

User Interface Features
975-0052-01-01 Rev A 27
User Interface Features
The ICAP User Interface has the following features. The user
can either click on the virtual buttons or use keyboard
commands to navigate through the program.
•
The ICAP Menu Bar is used for setting ICA parameters
(such as number of connected inverters, port usage,
customer ID etc.)
• Navigation Buttons are used to navigate through and alter
SW Plus Menu Maps.
•
Click on these buttons to navigate through the Menu
maps.
• Holding your mouse over these buttons will make a
keyboard command display. Keyboard commands
are also listed starting on page 32 of this manual.
• LEDs and LCD - Displays system status.
• Multiple Unit Drop-Down box - Only appears if ICAP
has been set up for multiple ICAs (page 35).
Figure 3-2 ICAP User Interface Window
ICAP
Menu Bar
01A Inverter
OFF SRCH ON CHG
Navigation
Buttons LEDs
LCD Display
INV/GEN Buttons
Menu Heading Buttons
Menu Item Buttons
Set point Buttons
} {
Multiple Unit
Drop-Down Box
EXIT