Xantrex Technology Inverter Communications Adapter - Manual (Page 32)

Configuration
16 975-0052-01-01 Rev A
5. The ICAP installation folder will default to the location
shown in Figure 2-4. If you do not want the software
installed at the default location, enter the desired location
in the window below “Install files to this location” or use
the BROWSE button to navigate to the desired location.
6. Click on the NEXT button to continue with the
installation. The Shortcut Folder screen will appear next.
The shortcut folder is where you will find the shortcut to
start the program within the “START/Programs” menu.
7. If the location of the Shortcut Folder is acceptable, click
on the NEXT button to continue with the installation. If
you want to change the location of the shortcut folder,
enter a different name for the folder in the window below
the line “Shortcut Folder”, then click on the NEXT
button.
Figure 2-4 ICAP Install Folder Screen
Figure 2-5 ICAP Shortcut Folder Screen