Xantrex Technology Inverter Communications Adapter - Manual (Page 42)

Operation
26 975-0052-01-01 Rev A
Starting ICAP
The ICA program can be started with either of the following
methods.
Method 1: If you allowed the setup program to put an
application shortcut on your desktop:
• Double click on the shortcut icon on your desktop.
Method 2: If you did NOT allow the setup program to put
an application shortcut on your desktop:
1. Click S
TART
, then P
ROGRAMS
, then X
ANTREX
.
2. Then select .
When the program starts, the following splash screen will
appear briefly.
After which will follow the Inverter Control Module (ICM)
Emulation Screen. This screen emulates all the features and
functions of the ICM.
See the Inverter’s Owner’s Guide for details on operational
functions of the ICM.
Figure 3-1 ICAP Splash Screen