Xerox 6400 - Manual (Page 46)

Xerox 6400 Scanner User’s Guide 41
Scanning
The following example of the One Touch window shows the
settings for Scan Button. The button is set to scan with the scan
configuration named Color Document and then open ScanSoft
PaperPort to display the scanned image. The Format and Page(s)
option is set to scan in the JPG image format.
The settings on the Properties window are:
Select Destination—the list of applications that can open to
display the scanned image for the selected button. To configure the
list of available applications, click the Options tab at the top of the
dialog box and select the desired options. See “Selecting Options
for a Button” on page 57 for more information.
Select Configuration—the list of available scan configurations for
the selected button. The configuration settings include: scanning
mode, resolution (dpi), page size, brightness, color saturation, hue,
and gamma. To see a selected scan configuration’s settings, click
its icon. Click the icon again to close the detailed information.
NOTE: Some of the options on the One Touch Properties
Window (and other One Touch windows and dialog boxes) are
“grayed out” and are not available. Grayed out options are not
appropriate for your Xerox 6400 scanner. If you use the One
Touch application with other Xerox scanners, grayed out options
become active, if appropriate.
The Destination Application.
This is the application that
opens when you are finished
scanning.
The settings that
the scanner uses
when scanning
with the currently
selected button
(in this case the
Scan Button).
The file format of
the images of
the scanned
item.
Click to select
options.
Click the tab that corresponds
to the scanner button you want
to configure.
Click the icon of a
selected configuration
to view its settings.