Xerox 6400 - Manual (Page 71)

Scanning
66 Xerox 6400 Scanner User’s Guide
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
Twain—The Basic Interface or Advanced Interface appears for
you to configure the scanning. See “Scanning from PaperPort”
on page 19.
WIA—The Windows Image Acquisition Interface (WIA)
appears for you to configure the scanning. See “Maintenance”
on page 83.
5. Click OK or Apply on the One Touch Properties window.
Scanning with Event Forwarding
You use event forwarding to specify another application to use for
scanning before you start. A typical example is if you want to use
another application’s TWAIN interface to select scanning options
before you start scanning. When you press the scanner button
designated for event forwarding, the scanner waits to start
scanning until you select the application to use. After you select the
application, its interface opens and you use it to continue scanning.
NOTE: If you scan a lot of transparencies, set up Configure
Before Scan to open the Twain interface. The PaperPort
software and Basic or Advanced Interface, where you select
transparency scanning, then opens automatically.
NOTE: The WIA option is available if your computer is running
Microsoft Windows ME or XP.
Select the button.
Select Configure
Before Scan.