Yeoman YM-CL8HB - Manual (Page 24)

24
INSTALLATION INSTRUCTIONS
3. FITTING AND REMOVAL OF
THE BAFFLE
No tools are required.
3.1 To maintain efficient combustion the appliance is fitted with
a baffle system that allows for secondary combustion (see
Diagram 4).
4
PR8885
3.2 First remove the log guard from the stove to give access to
the firebox.
3.3 Use both hands to lift the baffle vertically and slide to one
side (see Diagram 5). Always wear gloves when handling
appliance parts.
5
AR2404
—
Using both hands rotate the baffle to remove from the
firebox through the door opening.
3.4 To replace the baffle repeat the above steps in reverse,
ensuring the baffle fits over the supports on the sides of the
interior (see Diagram 6).
6
Rear
support
Front
support
Baffle In Place
AR2405
AR2406
Ensure baffle sits
on front supports
Do not modify the baffle.
4. REMOVAL OF RIDDLING MECHANISM
4.1 THE MULTI-FUEL GRATE CAN BE REMOVED FOR
CLEANING TO MAINTAIN GOOD WORKING
CONDITION.
To remove the grate:
—
Remove the baffle (see Section 3).
—
Remove the log guard to enable access (see Section 2).
—
Remove the ashpan.
—
Remove the riddling bars (see Diagram 7).
FOR CLARITY, THE FOLLOWING DIAGRAMS DO NOT
INCLUDE ILLUSTRATIONS OF THE DOORS.