Xerox Nuvera 120 EA - Manual (Page 16)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 16 -
Operations
Item
Xerox Nuvera ® 100/120/144 EA
Digital Production System
Comment
Power Up 7½ minutes
If the environment does drift outside the specified range during
the systems’ powered down state, some period of image
degradation can be expected at startup.
First Copy Out
Time (FCOT) 8½ seconds (with one finisher and no
inserter) Copy job sent to the top tray; platen scan, simplex job, 8.5 x 11
LEF fed from tray 1
First Print Out
Time (FPOT)
9½ seconds.
Printer should not cycle down as long as it receives an image
to print within 5 seconds of completing the previous sheet.
Restart Time 5 minutes
Billing Meters
Available via the Administration
window.
Vary by operating company / country; ask local analyst or
sales representative to explain your meter operation.
Automated reading of the billing meter is available, if Remote
Services are enabled.
Print Quality
Adjustments
Automatic, brief pauses for registration or
xerographic process adjustments to
maintain high image quality
Mixed Plex
Printing
Switching between one-sided and two-
sided printing does cause some loss of
productivity. The extent of the loss is
directly related to the frequency of the
switch.
When producing collated sets run 1 to N, the system already
optimizes performance. In other cases, adding a blank side to
the job can minimize impact, but the sheet is billed.
Supplies and Component Yields
The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera
®
100/120/144 EA Digital Production System and provide the highest and most consistent image quality,
maximum machine productivity, and uptime.
All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½”
x 11” / A4 Xerox 20 lb. bond (75 gsm) stock. Please note that actual yields vary greatly depending on
area coverage, paper stock, and image quality control settings. The current estimates are shown
below.
Consumables
Supply Yield Estimates
EA Toner 210,000 prints/bottle; 1 bottle per system (2 nd toner bottle is available as an option)
BFM 100 Sheet Staple refills and drivers. 15,000 staples per supply package,
The package contains three 5000 staple refills and 3 drivers
BFM 30 Sheet Staple refills and drivers 15,000 staples per supply package,
The package contains three 5000 staple refills and 3 drivers
MFF 100 Sheet Staple Cartridge Comes installed in machine. Filled with 1 - 5,000 staple refill, this cartridge typically lasts the life
of machine.
MFF 100 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton
MFF 50 Sheet Staple Cartridge Required for initial 50-sheet stapler capacity order. Filled with 1 - 5,000 staple refill, this
cartridge typically lasts the life of machine.
MFF 50 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton.
Staples Refills for MFF Booklet Maker
(1 for rear and 1 for front stapler required) 2,000 staples per box; 16,000 per carton
(8 Boxes per carton)