Xerox Nuvera 120 EA - Manual (Page 9)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 9 -
New Capabilities with Xerox Nuvera ® System Release 8.0
Note that this software release is only available for Nuvera
®
EA Digital Production System configurations. It is
not compatible with Nuvera
®
Copier/Printer, Nuvera
®
Digital Production System, or the Nuvera
®
MX Digital
Production System configurations.
• A new toner (EA) is enabled in this configuration that uses a smaller particle size. Overall image quality is
improved because of higher fidelity due to the smaller particle sizes, and reduced toner mass results in more
reliable fuser stripping. These result in performance improvements across the supported media range, and
enable less frequent service. Specific image quality benefits include:
- sharper text
- sustained halftone uniformity
- no image scatter on coated stocks
- no toner puffs.
• EA systems include one toner bottle, yielding 210K images at 6% area coverage.
• The Multifunction Finisher is now also available in the Pro Plus configuration, which adds hole punching and
insertion (via an Insertion Tray) capabilities
• Improved system reliability and stacking performance with the inclusion of the new Sheet Enhancement
Module (SEM) on configurations that include the BFM or FTM finishing modules.
• Enablement of 2 BFM Plus units in combination with downstream 3rd party finishing via the Finishing
Transport Module
• A base offering of DocuSP® that consists of a single queue and a simplified media programming model. An
optional upgrade, known as the Productivity Pack, enables multiple queues and enhanced media
management using the stock library.
• A base Image Quality offering of a 125 lpi halftone screen, with an optional Enhanced IQ upgrade to include
85, 106, 134 and 156 lpi halftone screens. These screens are applicable to PS/PDF/TIFF/PCL
DataStreams.
• The Windows Drivers now support bi-directional communications. Also available is a driver for the Windows
Vista platform
• Jam recovery offset sheet in the BFM configuration that enables easy stack inspection at each occurrence of
a jam in a run
• The IPDS Finishing Operation Triplet is now supported (for stapling operations only) as part of an XOH
Define Group Boundary command.