Xerox Nuvera 120 EA - Manual (Page 52)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 52 -
Xerox DS5000 High Capacity Stacker
The DS5000 High Capacity Stacker (HCS) provides long periods of
unattended operation and facilitates transport of accumulated offset stacks
of printed output for post processing. The stacks are easily moved on one
of two wheeled dollies supplied with stacker.. The stackers bypass
capability allows for transporting output to inline 3
rd party finishing devices.
A Finisher Transport Module is required for in-line connectivity to the printer.
Please refer to the DS5000 Solutions Planning Guide for further site planning
information, system dependencies, limitations, valid configurations and device specifications
Dimensions DS5000
Width X Depth X Height 39.4” x 28.7” x 47.2” (1000mm x 730mm x 1200mm)
Input Height
40.3” (1024mm)
Bypass Output Height 40.3” (1024mm)
Weight 429 lbs. (195 kg) (includes 1 dolly)
Clearance: Operator Minimum 24” in front of module
Clearance: Service Minimum 30” on all sides
DS5000 Electrical &
Environmental Minimum Maximum
Temperature Range 50 ° F (10° C) 90 ° F (32° C)
Humidity Range 10% RH 85% RH
Altitude No restriction No restriction
Sound Emission 72 dBs
Power
107 - 127 VAC, 60 Hz, 15 Amps, Single Phase
220/230/240 (Line to Neutral) VAC
± 10%, 50 Hz, 13 AmDPS/10 Amps
GFI Independent Power Cord
Media Latitude DS5000
Stock Weight Range
Uncoated: 16 lb. bond to 110 lb. index (60 to 200 gsm)
Coated, Single Side: 120 – 220gsm
Coated, Two Sides: 120 – 220gsm
Stock Size Range 7.0” x 10.0” to 12.6” x 18.5” (177.8mm x 254mm to 320mm x 470mm)
Specialty Media Carbonless, Tabs, Never Tear, Pre-printed Offset
Top Tray Capacity 250 (20 lb. bond / 75 gsm)
Main Stacker
5000 (20 lb. bond / 75 gsm)
Maximum Stack Height 18.3” (465mm)
Stapler None
Notes related to DocuPrint migration
The DS5000 is a sheet stacking device. It is designed to optimally deliver sheets one at a time into a neat
stack, and optionally offset between the sheets; however the following should be noted:
• The stack height limit cannot be adjusted.
• When full, it will switch to another available DS5000 stacker, if present.