Xerox Nuvera 120 EA - Manual (Page 34)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 34 -
Sheet Feed Modules
Item Xerox Nuvera ® 100/120/144 EA Digital Production System
Sheet Feed Module (SFM)
4 Tray
Large Format
Sheet Feed Module (LFSFM)
2 Tray
Capacity
20 lb bond
(75 gsm)
• Paper Input Capacity: 5800 sheets
--Tray 1: 1,600 sheets
--Tray 2: 3,100 sheets
--Trays 3 & 4: 550 sheets each
• Paper Input Capacity: 3200 sheets
--Trays 1 & 2: 1,600 sheets
Capacity
80gsm, 0.105 mm
• Paper Input Capacity: 5565 sheets
--Tray 1: 1505 sheets
--Tray 2: 3020 sheets
--Trays 3 & 4: 520 sheets each
• Paper Input Capacity: 3030 sheets
--Trays 1 & 2: 1505 sheets
Minimum Size • Trays 1 & 2
--Feed Direction: 5.5 inches (140 mm)
--Across Feed Direction: 8.0 inches (203 mm)
• Trays 3 & 4
--Feed Direction: 7.17 inches (182 mm)
--Across Feed Direction: 8.0 inches (203 mm)
• Trays 1 & 2
--Feed Direction: 7.17 inches (182 mm)
--Across Feed Direction: 8.0 inches (203 mm)
Maximum Size • Trays 1 & 2
--Feed Direction: 9.0 inches (229 mm)
--Across Feed Direction: 12.6 inches ( 320 mm)
• Trays 3 & 4
-- Feed Direction: 18.5 inches (470 mm)
--Across Feed Direction: 12.6 inches (320 mm)
• Trays 1 & 2
-- Feed Direction: 18.5 inches (470 mm)
--Across Feed Direction: 12.6 inches (320 mm)
Media Types
(MFF Config.)
• Bond, Bristol, cover, index, offset, recycled, vellum, tabs and Mylar tabs, transparencies, carbonless,
labels, Never-Tear, pre-printed forms
• Booklet envelopes: 6” x 9”, 7” x 10”, 162mm x 229mm (C5), 178mm x 254mm
• Catalog envelopes: 6” x 9”, 7” x 10”, 162mm x 229mm (C5), 178mm x 254mm
Media Types
(BFM / FTM Config.)
• Bond, Bristol, cover, index, offset, recycled, vellum, tabs and Mylar tabs, transparencies, carbonless,
labels, Never-Tear, pre-printed forms
• Booklet envelopes: 9” x 12”, 228mm x 305 mm , Catalog envelopes: 7” x 10”, 178mm x 254mm
Input Weight
(MFF Config.) • Uncoated: 16 lb bond to 120 lb index (56 gsm to 220 gsm)
• Does not support coated stocks – image quality and performance (jams) maybe degraded
Input Weight
(BFM / FTM Config.)
• Uncoated: 16 lb bond to 90 lb cover (56 gsm to 250 gsm)
• Coated: 90gsm to 250gsm
Feeding System • Air shuttle • Air shuttle
COMMENTS
• Auto tray switching & Load while run capability are supported. Do not open trays when the “Drawer in Use”
light is lit.
• Statement tabs and A5 tabs are not supported on configurations with the BFM or FTM devices. On
configurations using the MFF, Statement tabs can only be output to the Top Tray in the finisher; they cannot be output to the
Main Stacker.
• For configurations with the MFF: Booklet Envelopes should be fed with flaps closed and on long edge, flap
side down; Catalog Envelopes should be fed with flaps open, towards operator, with glue side down.
• Paper handling reliability of coated papers is reduced below 120 gsm.
• Trays do not feed to empty. When a feeder empty message is displayed, there could be as much as 80
sheets of stock remaining in the feeder tray (based on 20lb. bond / 75 gsm). This is to maintain the best
possible reliability in the feeder mechanisms.
• The use of Xerox media as listed in this document is recommended. Because there is a difference in
technology between offset and digital printing, there is a difference in media properties required for optimum