Xerox Nuvera 120 EA - Manual (Page 41)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 41 -
Other 100-sheet stapler cartridge typical minimum capabilities:
- 70 sheets for 28lb (105 gsm) of paper sized 8.5" x 14 or less
- 30 sheets for 80lb cover (216gsm), all paper sizes
- 20 sheets for 28lb (105gsm) Color Expressions and equivalent papers, all paper sizes
Other 50-sheet stapler cartridge typical minimum capabilities:
- 35 sheets for 28lb (105 gsm), all paper sizes (including CX and equivalent papers)
- 15 sheets for 80lb cover (216gsm), all paper sizes
- 20 sheets for 28lb (105gsm) Color Expressions and equivalent papers
Staple Cartridge Limitation: The machine software does not distinguish between the 50 sheet staple cartridge
and the 100 sheet staple cartridge. This means that if the 50 sheet staple cartridge is loaded in the machine,
and a job with more than 50 sheets is sent to be stapled, a mis-staple or stapler jam will probably occur. If the
50 sheet staple cartridge is used, it is the responsibility of the operator to ensure that jobs exceeding 50 sheets
are not submitted for stapling.
This product is not DFA compatible.
Booklet Maker Note: When using the booklet maker, some pre-printed cover sheets may exhibit tear-off from
the stapled booklet, depending on the pre-printed ink area coverage and ink type. It is advisable to verify your
application prior to production.
Pro Plus Finisher
Includes capabilities above plus Hole Punch capabilities as well as Insertion Tray capability
Top Tray / Offset Stacker / Stapler / Booklet Maker / Z-fold / C-fold: same capabilities and
limitations as above
Sub-system Feature Comments
Insertion Tray 200 sheet capacity (20 lb. Bond, 75gsm)
6.93” x 8.0” to 11.73” x 18.5”
176 x 203 mm to 298 x 470 mm
• Inserts can be delivered to the top tray,
main tray, or the booklet maker
• Tabs must be forward collated, and should
be loaded with the tab edge leading
• Mixed size media are not supported
Hole Punch 2 / 3 (standard), or 2 / 4 (optional) hole punching
for North American markets
2 / 4 (standard), or 2 / 3 (optional) hole punching
for European markets
• 2-hole punch for stock size ranges:
5.83” x 8.0” to 12.64” x 18.0”
148 x 203 mm to 321 x 457mm
• 3-hole punch for stock size ranges:
5.83” x 9.13” to 12.64” x 18.0”
148 x 232 mm to 321 x 457mm
• 4-hole punch for stock size ranges:
5.83” x 10.04” to 12.64” x 18.0”
148 x 255 mm to 321 x 457mm
Punched sheets Chad Bin capacity is 15,000
• Punched sheets can be delivered to the top
tray or the main tray
• The upper limit of media weight that can be
punched is 110 lb. Bond (200 gsm)
• Punching should not be used on
Transparencies, Labels and Synthetic or
Modified media.
• 4-hole punching on letter and ledger
(11”/279mm cross-process length) media
should not be used in conjunction with
single stapling (staple will overlap the
punched hole).
• The 2 / 4 hole punching has all holes
equally spaced, with 80mm between holes
(7mm dia.). This is not a Swedish 4 hole
punch configuration; currently we do not
support that configuration .