ZyXEL Communications P-334 - Manual (Page 42)

Prestige 334 User’s Guide
41 Chapter 2 Introducing the Web Configurator
The following table describes the sub-menus.
Table 1 Screens Summary
LINK TAB FUNCTION
WIZARD SETUP Use these screens for initial configuration including general
setup, ISP parameters for Internet Access and WAN IP/DNS
Server/MAC address assignment.
SYSTEM General This screen contains administrative and system-related
information.
DDNS Use this screen to set up dynamic DNS.
Password Use this screen to change your password.
Time Zone Use this screen to change your Prestige’s time and date.
LAN IP Use this screen to configure LAN DHCP, TCP/IP settings and to
enable Any IP.
Static DHCP Use this screen to assign IP addresses on the LAN to specific
individual computers based on their MAC Addresses.
IP Alias Use this screen to partition your LAN interface into subnets.
WAN Route This screen allows you to configure route priority.
WAN ISP Use this screen to change your Prestige’s WAN ISP settings.
WAN IP Use this screen to change your Prestige’s WAN IP settings.
WAN MAC Use this screen to change your Prestige’s WAN MAC settings.
Traffic Redirect Use this screen to configure your traffic redirect properties and
parameters.
SUA/NAT SUA Server Use this screen to configure servers behind the Prestige.
Address
Mapping
Use this screen to configure network address translation
mapping rules.
Trigger Port Use this screen to change your Prestige’s trigger port settings.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.
FIREWALL Settings Use this screen to activate/deactivate the firewall and log packets
related to firewall rules.
Services Use this screen to enable service blocking.
CONTENT
FILTERING
Filter This screen allows you to block sites containing certain keywords
in the URL and set the days and times for the Prestige to perform
content filtering.