ZyXEL Communications P-334 - Manual (Page 43)

Prestige 334 User’s Guide
Chapter 2 Introducing the Web Configurator 42
REMOTE MGMT TELNET Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
Prestige.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the Prestige.
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the
Prestige.
SNMP Use this screen to configure your Prestige’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the
Prestige.
Security Use this screen to change your anti-probing settings.
VPN Summary Use this screen to view the rule summary.
Rule Setup Use this screen to configure VPN connections.
SA Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to allow NetBIOS packets through the VPN
connections.
UPnP UPnP Use this screen to enable UPnP on the Prestige.
TMSS Service Settings Use this screen to decide which computers in the network you
can apply TMSS.
Antivirus
Protection
This screen allows you to check the computers in your network
for Trend Micro Internet Security.
Parental
Controls
This screen allows a parent (LAN administrator) to control a LAN
user's Internet access privileges by blocking specified website
categories.
LOGS View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your Prestige’s log settings.
MAINTENANCE Status This screen contains administrative and system-related
information.
DHCP Table This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Any IP Use this screen to allow a computer to access the Internet
without changing the network settings of the computer, when the
IP addresses of the computer and the Prestige are not in the
same subnet.
F/W Upload Use this screen to upload firmware to your Prestige.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your Prestige.
Restart This screen allows you to reboot the Prestige without turning the
power off.
LOGOUT Click this label to exit the web configurator.
Table 1 Screens Summary
LINK TAB FUNCTION