3Com 09-1632-000 - Manual (Page 26)

26 C ONFIGURING Y OUR O FFICE C ONNECT NETB UILDER 10 B RIDGE /R OUTER
b In the AuthLocalUser field, enter the username and
password for office B in quotes. For example, enter:
"OfficeB" "passwordB"
c Click Apply.
5 In the Dial on Demand Dynamic Dial section on the
navigation frame, click the PPP AuthRemoteUser link.
a In the start field, choose 4.
b In the AuthRemoteUser field, enter the username and
password for office A in quotes. For example, enter:
"OfficeA" "passwordA"
c Click Apply.
6 Enable port control to establish PPP connectivity using
access security.
a In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PORT CONTrol link.
b In the start field, choose 4.
c In the CONTrol field, choose Enabled.
Your OfficeConnect NETBuilder bridge/router configuration
is complete.
OC10.book Page 26 Thursday, May 13, 1999 2:33 PM