8e6 Technologies 3 - Manual (Page 130)

130 8 E 6 T ECHNOLOGIES , E NTERPRISE R EPORTER 3.0 U SER ’ S G UIDE
C
LIENT
U
SER
S
ECTION
: C
HAPTER
3 - C
USTOMIZING THE
C
LIENT
You must now add the user to a user group by making entries
in either the User Information frame or the Group Information
frame. While both frames contain similar contents, each
serves a different function. The User Information frame is
used for maintaining a list of authorized users, while the
Group Information frame is used for maintaining user groups.
User Information frame
In the User Information frame, you can add a user to a user
group, or remove a user from a user group.
Add User to a User Group
1. Select the User from the pull-down menu. If the user has
been added to other groups, these groups display in the list
box below.
2. From the Add To Group pull-down menu, select the group
to which the user should be added.
3. Click Go to open an alert box displaying the message:
“Group added.”
4. Click OK to close the alert box and to display the group
name in the list box above.
Remove User from a User Group
1. Select the User from the pull-down menu. The user’s
group(s) display(s) in the list box below.
2. Select the group from which the user should be removed by
clicking on your choice to highlight it.
3. Click the Delete From Group button to remove the group
from the list box, and to open an alert box displaying the
message: “Removed from group.”
4. Click OK to close the alert box.