8e6 Technologies 3 - Manual (Page 46)

46 8 E 6 T ECHNOLOGIES , E NTERPRISE R EPORTER 3.0 U SER ’ S G UIDE
A
DMINISTRATOR
S
ECTION
: C
HAPTER
2 - C
ONFIGURING THE
ER 3.0 S
ERVER
Perform a Restoration to the ER 3.0 Server
There are two parts in performing a restoration of data to your
ER 3.0 Server. Part one requires data to be loaded on the
remote server and then FTPed to the ER 3.0 Server. Part two
requires the FTPed data to be restored on the ER 3.0 Server.
NOTE: Before restoring backup data to the ER 3.0 Server,
be sure you have enough space on the ER 3.0 Server. Data that
is restored to the ER 3.0 Server will automatically include in-
dexes.
Perform these steps on the remote server:
1. Load the backup data on your remote server.
2. Log in to your FTP account.
3. FTP the backup data to the ER 3.0 Server’s internal backup
drive.
On the ER 3.0 Server’s Backup screen:
1. Click the Manual Restore button in the Internal Backup/
Restore Action frame to specify that you wish to overwrite
data on the live ER 3.0 Server with data from the previous,
internal backup run.
2. On the Confirm Backup/Restore screen, click the Yes
button to restore database tables and indexes to the ER 3.0
Server.
NOTE: The amount of time it will take to restore data to the
ER 3.0 Server depends on the combined size of all database
tables being restored. 8e6 recommends that you do not perform
other functions on the ER 3.0 Server until the restoration is
complete.