Festool LEX 2 185-7 - Manual (Page 12)

12
Compressed air eccentric sander
Technical data
Sanding pad diameter
- LEX 2 125
125 mm
- LEX 2 150 150 mm
- LEX 2 185 185 mm
Drive Compressed-air vane motor
Operating pressure (fl ow pressure) 6 bar
Speed
- LEX 2 125/3, LEX 2 125/7, LEX 2 150/3,
LEX 2 150/7, LEX 2 185/7
6500 - 8000 rpm
- LEX 2 150/11 6000 - 7000 rpm
Working strokes
- LEX 2 125/3, LEX 2 125/7, LEX 2 150/3,
LEX 2 150/7, LEX 2 185/7
13000 - 16000 rpm
- LEX 2 150/11 12000 - 14000 rpm
Sanding stroke
- LEX 2 125/3, LEX 2 150/3
3 mm
- LEX 2 125/7, LEX 2 150/7, LEX 2 185/7 7 mm
- LEX 2 150/11 11 mm
Air consumption at nominal load 390 l/min
Weight
- LEX 2 125, LEX 2 150
1.3 kg
- LEX 2 185 1.4 kg
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
1 Use for intended purpose
As specified, the machines are designed for
sanding wood, plastic, metal, stone, composite,
paintwork, fi ller and similar materials.
Material containing asbestos must not be proc-
essed with these tools.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General safety instructions
Warning! Before setting up, using, repair-
ing and servicing this air tool or replacing
accessory parts, you must have read and
understood all safety instructions and informa-
tion. Ignoring warning notes and instructions may
result in serious injuries.
Keep all of the attached documents and pass
on the documentation if the machine changes
ownership.
Keep your place of work tidy. a. Untidiness in
working areas increases the risk of an accident.
Please take your surroundings into consid-
b.
eration. Do not leave pneumatic tools out in
the rain. Keep work area well lit.
Never use pneumatic tools in the vicinity of
fl ammable liquids or gases.
Keep away from children.
c. Do not allow oth-
ers to touch the pneumatic tool or the com-
pressed-air hose.
Keep others away from your work area.
Store your pneumatic tools safely.
d. Unused
pneumatic tools should be stored in a dry, in-
accessible or locked location, out of the reach
of children.
Use the correct pneumatic tool.
e. Do not use
the pneumatic tool for purposes for which it
was not intended.
Wear suitable work clothes.
f. Do not wear
loose fi tting clothing or jewellery. They can
get entangled in moving parts.
Rubber gloves and non-slip footwear are rec-
ommended for outdoor work. Long hair should
be protected with a hair net.
Wear safety goggles.
g. You should also wear a
face mask for work which produces dust.
Connect a dust extractor.
h. Make sure that
available dust extraction equipment is con-
nected and used correctly.
Observe the regional safety regulations for
hazardous dusts and vapours.
Operate and service the air tool as described
in the recommendations included in these
instructions and use accessories and attach-
ments from Festool to minimise the release of
dust and vapours into the atmosphere.
In dusty environments, make sure that the dis-
sipation of exhaust air does not disturb the dust.
Do not use the compressed-air hose for pur-
i.
poses for which it was not intended. Never
carry the pneumatic tool by the compressed-
air hose.
Protect the compressed-air hose from heat,
oil and sharp edges.
Never direct the air fl ow towards yourself or
other persons.
Secure the workpiece.
j. Use clamping devices
or a vice to hold the workpiece fi rmly.
These clamp the workpiece more securely
than with hands and also allow both hands to
be free to operate the pneumatic tool.
Avoid abnormal postures.
k. Maintain a safe
stance and keep your balance at all times.