Festool SHINEX RAP 150 FE - Manual (Page 12)

12
SHINEX GB
Original operating manual
The specified illustrations appear at the begin-
ning of the Operating Instructions.
1 Symbols
2 Technical data
3 Machine features
4 Intended use
The machine is designed for polishing painted
surfaces. To guarantee electrical safety, the
machine must not be damp or operated in a
damp environment.
The user bears the responsibility for damage
and accidents caused by improper use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– This power tool is intended to function
as a polisher. Read all saftey warnings,
instructions, illustrations and specifica-
tion provided with this power tool. Fail-
ure to follow all instructions listed below
may result in elektric shock, fire and/or se-
rious injury.
– Operations such as grinding, sanding,
wire brushing or cutting-of are not rec-
ommended to be performed with this
power tool. Operations for wich the power
tool was not designed may create hazard
and cause personal injury.
– Do not use accessories which are not
specially designed and recommended
by Festool. Just because the accessory can
be attached to your power tool, it does not
assure safe operation.
– The rates speed of the accessory must
be at least equal to the maximum speed
marked in the power tool. Accessories
running faster than their rated speed can
break and fly apart.
– The outside diameter and the thickness
of your accessory must be within the
capacity rating of your power tool. In-
1 Symbols .................................. 12
2 Technical data .......................... 12
3 Machine features ...................... 12
4 Intended use............................ 12
5 Safety instructions .................... 12
6 Operation ................................ 14
7 Settings................................... 14
8 Working with the machine .......... 15
9 Service and maintenance ........... 15
10 Accessories .............................. 16
11 Disposal .................................. 16
12 Warranty ................................. 16
13 EU Declaration of Conformity ...... 16
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear protective goggles.
Wear ear protection.
SHINEX RAP 150 FE
Power
1200 W
(110 V version: 10 A)
Speed 400 - 2100 rpm
Max. speed
1
1. Max. possible speed with faulty electronics.
3000 rpm
Polishing pads up to dia. 150 mm
Weight (without mains cable/
polishing pad) 2.1 kg
Safety class /II
[1-1] Spindle stop
[1-2] Speed control
[1-3] Locking button
[1-4] On/Off switch
[1-5] Lint filter
[1-6] Additional handle
[1-7] Polishing pads