Festool Power box - Manual (Page 17)

EAA
17
GB
* not on all versions included in the scope of deliv-
ery
The illustrations specified are located at the begin-
ning and end of the operating manual.
6 Design
6.1 Energy box
The EAA energy box consists of two sections:
– Section containing electrical components such
as sockets and selector switches for electric
power tools (EW).
– Section containing pneumatic components, in-
cluding connections for pneumatic tools (DW).
6.2 Versions
The different versions offer the following features:
EAA EW CT/SRM/M
– 3 sockets, 1 non-adjustable, unlubricated com-
pressed air connection (not suitable for connect-
ing Festool compressed air sanders!).
– Manually operated slide.
 The slides are linked mechanically. Dust can
therefore only be extracted from one machine at
any one time. The slide setting is monitored by a
microswitch.
EAA EW TURBO/M
– 3 sockets, 1 non-adjustable, unlubricated com-
pressed air connection (not suitable for connect-
ing Festool compressed air sanders!).
– Manually operated slide.
 Dust can be extracted from two machines at the
same time. The slide setting is monitored by a
microswitch (basic position: slide closed).
EAA EW/DW CT/SRM/M
– 3 sockets, 1 maintenance unit (pressure regula-
tor, condensate trap, lubricator), 2 adjustable, lu-
bricated compressed air connections, 1 non-
adjustable, unlubricated compressed air connec-
tion (not suitable for connecting Festool com-
pressed air sanders!).
– Manually operated slide.
 The slides are linked mechanically. Dust can
therefore only be extracted from one machine at
any one time. The slide setting is monitored by a
microswitch.
EAA EW/DW TURBO/M
– 3 sockets, 1 maintenance unit (pressure regula-
tor, condensate trap, lubricator), 2 adjustable, lu-
bricated compressed air connections, 1 non-
adjustable, unlubricated compressed air connec-
tion (not suitable for connecting Festool com-
pressed air sanders!).
– Manually operated slide.
 Dust can be extracted from two machines at the
same time. The slide setting is monitored by a
microswitch (basic position: slide closed).
EAA EW/DW TURBO/A
– 3 sockets, 1 maintenance unit (pressure regula-
tor, condensate trap, lubricator), 2 adjustable, lu-
bricated compressed air connections, 1 non-
adjustable, unlubricated compressed air connec-
tion (not suitable for connecting Festool com-
pressed air sanders!).
– Pneumatically operated slides
 Dust can be extracted from two machines at the
same time. The slide setting is monitored by a
microswitch (basic position: slide closed).
6.3 Conversion kits
The following conversion kits are available to con-
vert the EAA to a different version at a later time:
CT/SRM/M >> TURBO/M
Modification: dust extracted by a stationary ex-
traction turbine instead of a mobile dust extractor.
The connector [3-2] between the two mechanically
operated slides [3-1] must be detached.
EW >> EW/DW (VE2-EAA: 495892)
Modification: additional connection socket for
pneumatic tools.
An additional maintenance unit (pressure regulator,
condensate trap, lubricator) and a compressed air
module including pneumatic hoses and connection
to electronics via wiring harnesses must be mount-
ed. Note: only trained and qualified electricians are
authorised to perform this work!
[1-2] Aluminium pipe
[1-3] Permanent socket
[1-4] On/Off switch
[1-5] Socket AUTO 2
[1-6] Compressed air connection* for pneu-
matic tools, adjusted via the pressure reg-
ulator on the maintenance unit
[1-7] Lock
[1-8] Extractor connector
[1-9] Socket AUTO 1
[1-10] Slide* for opening and closing the
extractor connector
[1-11] Unlubricated compressed air connection
on EW version only*