Environment, Troubleshooting, Accessories – Festool Power box User Manual

Page 23: Eu declaration of conformity

Advertising
background image

EAA

23

GB

Set the adjusting screw so that one drop of oil
escapes every 10-20 minutes.

Screw the condensate screw [2-8] all the way
in.

13

Environment

Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applica-
ble country-specific regulations.

EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:www.festool.com/reach

14

Troubleshooting

15

Accessories

The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".

16

EU Declaration of Conformity

Electrical faults

Action

Service

No power at permanent
socket

Check the mains cable connection on the EAA

Check the mains cable connection at the mains socket

No fault identified

Request assistance

No power at automatic
socket

Check the mains cable connection on the EAA

Check the mains cable connection at the mains socket

No fault identified

Request assistance

Slide does not open when
electric power tool is
plugged in

Check the control cable at both ends

Open the rear panel and check the solenoid/control
cable and reed contact

Check the compressed air connection

No fault identified

Request assistance

Slide does not close when
electric power tool is
plugged in

Check the control cable at both ends

Open the rear panel and check the solenoid/control
cable and reed contact

Check the compressed air connection

No fault identified

Request assistance

Selector switch set to
manual: extractor does
not start

Check whether the control cable is connected at both
ends

Check whether the extractor/turbine mains cable is
connected

No fault identified

Request assistance

Extractor / turbine oper-
ating but slide does not
open

Check whether the control cable is connected at both
ends

Check the flow pressure, min. 4 bar

No fault identified

Request assistance

Electric power tool does
not start

Check whether the selector switch is set to Auto

Check whether the mains cable is connected

Check whether the electric power tool is faulty

No fault identified

Request assistance

Energy box

Serial no.

EAA EW CT/SRM/M

495910, 495912

Advertising