Edimax Technology BR-6428nS - Manual (Page 11)

10
3. Connect the power adapter to the wall socket, and then to the “5VDC” socket on
the back panel of the router.
4. Please check all the LEDs on the front panel. The “PWR” and “WAN” LEDs should be
on. The “LAN” LEDs should be on if the computer or network device is connected
and correctly powered. If you encounter any problems, please make sure that all
your devices are connected and powered correctly.
5. For a better wireless signal, please arrange the antennas so that they are
perpendicular to the ground and place the wireless router in an open space. Please
also keep the antennas appropriately apart, for signal interference will cause a
degradation of wireless performance when the antennas are placed too close to
each other.