Edimax Technology BR-6428nS - Manual (Page 81)

80
value. Since most of wireless devices will negotiate
with each other and pick a proper data transfer
rate automatically, it’s not necessary to change this
value unless you know what will happen after
modification.
N Data Rate Same as above, but only for 802.11n clients.
Channel Width Set channel width of wireless radio. Do not modify
default value if you don’t know what it is, default
setting is ‘Auto 20/40 MHz’.
Preamble Type Set the type of preamble, do not modify default value
if you don’t know what it is, default setting is ‘Short
Preamble’.
Broadcast ESSID Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your wireless
router (set the option to ‘Disable’), so only people
those who know the ESSID of your wireless router can
get connected.
CTS Protect Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g/n
wireless access points. It’s recommended to set this
option to ‘Auto’ or ‘Always’. However, if you set to
‘None’, your wireless router should be able to work
fine, too.
WMM The short of Wi‐Fi MultiMedia, it will enhance the
data transfer performance of multimedia contents
when they’re being transferred over wireless
network. If you don’t know what it is / not sure if you
need it, it’s safe to set this option to ‘Enable’,
however, default value is ‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button , button, and the
following message will be displayed on your web browser: